Posted by Vaughn [172.68.141.19] on Sunday, November 24, 2019 at 20:06:25 :
In Reply to: taking steering wheel off posted by dave [162.158.107.100] on Sunday, November 24, 2019 at 11:30:11 :
You can make one easy enough, just has to be 1.5 inches wide to fit snug under the metal ring at the bottom of the wheel. I prefer this with a bearing separator and two arm puller especially if the wheel is on very tight, for an even pull. I've used the Military puller and it will pull to the side on a very tight wheel. You also need a shoulder spacer to go in the worm tube such as the one show in the posts below.