Posted by Kaegi [162.158.107.164] on Monday, September 09, 2019 at 22:48:20 :
In Reply to: Re: Removing flathead 6 posted by Ernie Baals [162.158.78.55] on Monday, September 09, 2019 at 21:10:57 :
I pull the floor pans and center hump, unbolt ebrake and tcase shifters, unbolt driveline, unbolt tranny, get in cab with good footing, slied tranny back and lower to the floor or lower onto floor jack then lower jack and get tranny out of the way, then pull nose and engine related bolts. the engine and bell housing come out in kind of a twist to clear steering box. slight tile up at front and twist the rear towards passenger side. go slow and should be smooth.
Follow Ups: