Posted by Dean Dysart [162.158.58.130] on Monday, July 22, 2019 at 21:36:13 :
In Reply to: Re: OFF TOPIC - Slave Cylinder Kit posted by Keith in Washington [108.162.215.103] on Monday, July 22, 2019 at 14:20:30 :
Keith,
The bore on the master cylinder was in good shape and I did hone it to get a cross hatch pattern. I just need the rubber part that is encased within the piston. As Manny suggested, I am in contact with a specialist that does what you are suggesting.
BTW, the slave cylinder was toast, NAPA has replacement and it ill by here tomorrow. I should have left the master cylinder to last and worked on the slave cylinder first. The underside of the truck is where I should have started but that is water under the bridge.
Oh well,
Dean