Posted by Alex J [162.158.78.199] on Wednesday, October 31, 2018 at 15:12:29 :
In Reply to: Re: Under-truck Driveline video - Carryall with Allison 1000 posted by Tom Petroff (IL) [162.158.74.150] on Wednesday, October 31, 2018 at 12:43:45 :
The transfer case has 4 polyurethane bushings supporting it through those longitudinally mounted bolts you see there on the mounts. There are bushing shells welded into the frame outriggers and the case is mounted to a plate that those vertical tabs are mounted to. They fork around the bushings, two on each side. The case seems to remain fairly stationary, however the tail housing of the Allison is dancing around a good bit and the intermediate shaft has some wobble. I am going to pull the shaft, and both yokes and have them balanced as a system, and then mark them as they are balanced so that everything will go back together as it should.