Posted by Jerry Henry [108.162.246.134] on Friday, October 19, 2018 at 18:32:11 :
In Reply to: Re: High heat thread sealant posted by Daryl in Oz [162.158.2.37] on Friday, October 19, 2018 at 18:24:34 :
The handle is factory. Stove is a Waterford, made in Ireland.
The bolt passes through the wood, and bottoms out against it, so the wood is held tight. By design, there is no way for it to be loose. I guess I could try a bolt that is maybe 1/8" longer. Then the bolt would bottom out and the wood could still be a little loose.
Follow Ups: