Posted by Tom Petroff (IL) [162.158.74.24] on Wednesday, August 22, 2018 at 23:22:53 :
In Reply to: VPW 12v conversion kit posted by Rick from Wa [162.158.106.201] on Wednesday, August 22, 2018 at 22:26:43 :
Fuel gage resistor goes in the power feed to the gage from the ign. switch.
Ballast resistor goes in the ign. wire from the switch to the coil.
The coil bracket usually has a tang with a hole for mounting the resistor, then short wire to the coil from other end of resistor.
Tom