Posted by Johnd [172.68.65.249] on Tuesday, August 14, 2018 at 08:12:42 :
In Reply to: Hot Exhaust/ posted by Dean Dysart [172.69.42.43] on Monday, August 13, 2018 at 22:27:26 :
Dean,
simple fix. The distributor plug wires need to move in the same order over one hole on the cap.
Your firing order is 153624. Leave your distributor in the position you need to to make it run. Remove plug wire number 4 from the distributor cap and move plug wire number 1 into the hole formerly occupied by #4. Next, move wire 5 to where #2 used to be. Continue this pattern until you have repositioned all plug wires one hole over.
After your done, all thats left is to adjust your timing by twisting the distributor to the sweet spot. Use your ear first, then put a timing light on it to set it perfectly
Follow Ups: