Posted by junkyardog [162.158.62.210] on Saturday, March 17, 2018 at 14:53:26 :
got my new bearings from napa i orded and the kit from vpw i went with the bearing on top and bottom for the knuckles. also went and dug out another front end i have and will take that cap off the top with the grease fitting and put it on the bottom of the knuckle of mine in the truck so i will have a grease fitting on bottom also.. found a case of grease in the corner of the garage i had so i will use that in the hubs. it probley will never turn. i have lock out hubs so i believe it will be fine... bought new grade 8 bolts and nuts and locks for the knuckles.. $14 for 4 grade 8 bolts.. sad part is i know i have some fine thread bolts in a bucket somewhere in this mess... time to make a clean sweep and find out what i need and don't need,
Follow Ups: