Posted by Doc Dave (in MD) [172.68.65.243] on Sunday, March 04, 2018 at 06:03:29 :
In Reply to: Re: Sounds like its time for a lathe. posted by Glen of Idaho [172.68.141.61] on Saturday, March 03, 2018 at 23:50:47 :
That would be best.
The aluminum pistons WILL corrode in the iron bore. I had a wheel lock up due to that, almost caused an accident.
I think the kits with aluminum should have a caution warning about dissimilar metal corrosion.
I was able to source some used iron pistons and all was good.