Posted by Vaughn [172.68.132.212] on Friday, December 22, 2017 at 16:21:13 :
In Reply to: 3/5T Radiator install, is there a trick? posted by jim lee [172.68.133.177] on Friday, December 22, 2017 at 14:48:49 :
Installation of Radiator Core (Vehicles with Fan Shroud).
(1) INSTALL RADIATOR CORE. Lower core between shell and
engine, placing bottom of core in position, then lift up on upper part
of shell at filler neck hole to permit core filler neck to clear hole in
shell and pull top of core forward into place. Install the fan
shroud. Install three toothed lock washers and cap screws at each
side of shroud and tighten shroud and core to support. Install hose
at top and bottom of radiator. Connect left radiator tie rod.
(2) INSTALL FAN BLADES
(3) INSTALL HOOD
(4) FILL RADIATOR
Follow Ups: