Poly 318 issues


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by njjim [172.69.62.25] on Monday, December 11, 2017 at 18:22:00 :

In Reply to: Anyone running a Pavlovich cam in their poly 318? posted by Ron in Indiana [162.158.74.6] on Sunday, December 10, 2017 at 13:59:22 :

Ron, I recently had a cam ground by Gary P to suit my poly 318 in a W300 with 3-2's on it. The motor has hydraulic lifters with no adjustment. The motor with this cam and carb setup in it performs outstanding. I must say that all my dealings with Gary were excellent. He even had a set of finned alum valve covers for my poly and they look great with the 3x2s. Here is the thought for your problem-Make sure that you have the correct PUSHRODS for your application, either solids or hydraulic. They are different It is hard to tell but they are. The difference is the end that fits into the lifter. Good Luck.



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


Enter the characters in the image to the left or Load New Code