problem with division bar fit to verticle channel


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by scott56 [172.68.141.169] on Tuesday, August 08, 2017 at 15:21:50 :

In Reply to: door installed, steps I ended up with posted by scott56 [172.68.141.169] on Sunday, August 06, 2017 at 16:39:11 :

First, taking good clear photos of 3 different black items and glass took several trys. The division bar slide up and down the wide vertical channel. There is a right angles piece of fuzzy piece that rivets to the division bar for the vent window to close against. In the photo I tried to show how it stick up a little above the smooth surface of the division bar and causes friction when running thru the channel. Anyone doing this with new parts should make sure the division bar move smoothly thru the channel before installing everything into the door. Not sure how i am going to fix it yet. it take a week to get more rivets from vintage because i might try to reinstall the right angle fuzzy to make sure it doesn't protrude above the division bar. ERRRRG!



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


Enter the characters in the image to the left or Load New Code