Posted by scott56 [172.68.141.169] on Tuesday, June 27, 2017 at 10:00:20 :
In Reply to: Re: windshield alignment posted by Ray [162.158.69.120] on Tuesday, June 27, 2017 at 06:58:11 :
When I mounted and adjusted the hinges, the frame fit the opening but needed to have pressure to push or pull it in farther so the seal would contact all the way around and seal up the gaps. Once I had it positioned, I attached the tape with the two screws, the tape would not go the last 1/2 inch into the body opening and pull the frame/seal flat. According to many posts, get the frame flat and the seal sealing, then let it sit in the sun for as long as possible until the seal shapes itself. It looks like the tape needs to move up on the frame.