Posted by Jackson Reimund on Sunday, November 04, 2001 at 8:49PM :
In Reply to: 230 will not idle posted by keith ( Alberta) on Sunday, November 04, 2001 at 7:54PM :
Not sure what you have done prior to the problem so where to step in is not clear.
Two things to check. 4 pounds Fuel pressure is enough. Put a pressure regulator in line as it may be flooding. Float setting wrong or check valve not working. But I don't think so. Second check your vacume with a gage or try holding your hand over the throat of the carburetor and with the motor running and the throat/Hand open, slowly close down over the throat with your cupped hand and if the idle picks up it is a vacume leak.
If you have not changed distributor or timing conditions don't mess with those.
|
Follow Ups:
This board is powered by the Mr. Fong Device from Cyberarmy.com |