Posted by Daryl in Oz [162.158.2.187] on Thursday, January 05, 2017 at 07:28:04 :
In Reply to: Re: Straightening out a tie rod posted by Tom Petroff (IL) [162.158.75.109] on Thursday, January 05, 2017 at 04:23:51 :
Straighten it as good as you can and use it. If you're worried it's going to fail, maybe you can cut out the damaged bit and sleeve some heavier pipe over it. I've seen them on logging trucks bent and straightened numerous times and not fail, always repair if any cracks.