Re: Toe-In Question


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Daryl Day [162.158.3.163] on Saturday, December 10, 2016 at 16:52:08 :

In Reply to: Toe-In Question posted by Greg Coffin [172.68.35.10] on Saturday, December 10, 2016 at 14:08:38 :

Like Tom said, centre of the tire to centre of tire. I have a couple of old tools for this passed on from my dad. One is a rod with a point at 90 degrees sliding inside a pipe with a similar point on one end and with a lock screw to hold the setting - much easier than trying to hold a tape in place around springs, steering and drive shafts. You put a chalk mark front and rear on front tires same distance from ground and adjust the tool to middle of the tire at the front or back edge, then check against the other edge.
The second tool is a pair of trammels that clamp to a length of tubing or dowel and used same way.



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com