Posted by Terry [199.27.133.57] on Friday, October 21, 2016 at 13:57:33 :
In Reply to: Believe it's 1-1/2" posted by Sherman in Idaho [108.162.246.17] on Friday, October 21, 2016 at 01:45:49 :
Not sure how secure the location of the motor is for leaving tools, but try this trick if it is a safe place.
Squirt penetrating solution in the cylinders thru spark plug hole. Attach socket and breaker bar onto crank. Place long section of pipe over breaker bar. Place cinder block hanging on end of pipe for weight. Let it do its "own thing" over a couple of days to pop free.
This way you reduce the chance of breaking a piston ring in the process.