Posted by Vaughn on Thursday, October 18, 2001 at 9:40PM :
In Reply to: Front Diff leak posted by EdC on Wednesday, October 17, 2001 at 6:18PM :
The gasket is a Fel Pro RDS5817, but you would be better off doing a tear down and rebuilding the front with new axle bushings, seals etc. If you want to replace that gasket, you will need to take off each knukle to pull the axles out. Once the pumkin is out, take all the studs off and chaffer the holes using a drill. Studs tend to raise the area around them a little and this allows the pumpkin to seat tight when put back together. Clean and inspect pumkin for cracks. It should not leak.
|
This board is powered by the Mr. Fong Device from Cyberarmy.com |