Posted by TGP (IL)ip [173.245.55.157] on Tuesday, September 27, 2016 at 06:46:38 :
In Reply to: Re: Starter Rod Pin Needed posted by Rick [199.27.128.222] on Monday, September 26, 2016 at 21:11:33 :
No picture.
The pin is straight 5/16 pin
About 1/2 long.
The clip is "U" shaped, with the
Sides dimpled to fit over the
Ends of the pin, and
Clips over the lever/rod and
Keeps the pin from moving.
Tom