Posted by Terry [199.27.133.57] on Saturday, September 24, 2016 at 21:40:16 :
In Reply to: Re: Two steps forward, one step backward... posted by John S [162.158.78.174] on Saturday, September 24, 2016 at 14:18:49 :
I have used a small gear puller inserted into holes similar to what you have drilled. Reverse the jaws so it grabs the metal ring of the seal on the outside, that's where they grab on you. If needed, apply pressure to the seal with the puller, add heat to the seal ring, should pop.