Posted by Dave [162.158.78.148] on Saturday, September 24, 2016 at 15:56:53 :
In Reply to: Two steps forward, one step backward... posted by CSCameron [173.245.48.208] on Saturday, September 24, 2016 at 12:55:02 :
CS, you cannot drill a hole for a puller and make it work, it will do what you described every time, instead, punch a small hole with a awl and screw the puller into that, it will tap it right out. by punching the hole it pushes several times the thickness of the metal into the hole, and gives several times the bite. Dave.
Follow Ups: