Posted by Jeremy Horvath [162.158.69.80] on Monday, September 05, 2016 at 12:02:49 :
In Reply to: brake update -i should have ordered the stock posted by clueless [108.162.210.231] on Monday, September 05, 2016 at 11:30:25 :
Dave's "Wendel" has hydrovac only on the rear. Without a load, it desperately tries to bring the rear around under even modest pedal pressure. The solution to this problem is rather simple. An adjustable proportioning valve would allow for brake balance when the truck is loaded or unloaded with a twist of the knob. If you go with hydrovac on one axle, I highly recommend designing in an adjustable proportioning valve. They can be bought at most hotrod supply chains like Summit, Jegs, etc..
Look for one with fitting threads at, or near, the size of your lines. You can also use a fitting adapter if required.
Follow Ups: