Posted by Greg Coffin [172.68.35.20] on Sunday, July 03, 2016 at 20:52:01 :
I'm rebuilding a set of M-series front and rear blackout lights for the 6x6 Power Wagon. I bought new internal mounting hardware and O-rings from McMaster-Carr, but I had to by 100 of each part, so I'm selling the extra hardware as kits to rebuild one light bucket. The kits include:
1ea - O-ring for the light "door" cover
4ea - Rubber grommets to mount the light sockets (2 for M37-B1 lights)
7ea - 8-32 x 1/2" Fillister head stainless steel mounting screws for the baffle and light sockets (5 for M37-B1)
7ea - #8 stainless steel internal star washers (5 for M37-B1)
Kits are $5.00 each, which includes all of the parts listed above. Shipping is $7.00 per order. Send orders to me at gregcoffin2.0 at gmail dot com.
I used a 3/16" metal spacer inside the rubber grommets to keep them from crushing, but I don't have any extra. The McMaster-Carr part number for zinc plated brass is 90309A270 ($0.76 cents each), and stainless steel is 92320A362 $1.08 each). You will need 4 per light bucket (2 for M37-B1). You can by them by the piece.
I'm going to run out of screws and washers first, so I will sell grommets and O-rings separately if needed. Contact me at gregcoffin2.0 at gmail dot com.