Posted by Milo in Pa [173.245.54.50] on Friday, July 01, 2016 at 10:11:52 :
In Reply to: fuel tank pickup tube posted by Miles Wagner [108.162.215.88] on Thursday, June 30, 2016 at 19:19:15 :
On my first truck I bent the fitting trying to get it out of the tank. So I went to Napa and got a fitting then bought 12 inch length of stainless line on ebay it was a very tight fit pressing the pipe into the fitting I also cut a V on the bottom of the line as I knew it was close to the bottom. The picture is of the old one I saved for some reason unknown