Posted by Daryl in Oz [162.158.2.15] on Thursday, May 26, 2016 at 18:10:54 :
In Reply to: Throw-out Bearing Adjustment? posted by CSCameron [162.158.255.144] on Wednesday, May 25, 2016 at 13:17:15 :
Clark, the bolt should be long enough so the spring sits almost horizontal and is under slight tension. The springs function is to return the thrust assembly and hold it against the fork after the clutch is released. if it's too loose the assembly can rattle around, if it's a bit too tight it will stretch but still work.
Follow Ups: