Posted by Milo in Pa [173.245.54.40] on Sunday, May 15, 2016 at 20:16:04 :
Finally getting to work on the power wagon some as other projects are closer to done. So I got it started and a water leak appeared by a head bolt one of the ones I replaced when adding power steering so I pulled the 3 bolts out and put sealer on them no more leak. Then when letting up on the clutch in neutral it was very noisy so I pulled the bell housing cover and listened with a short piece of broomstick and it sounded to be in the clutch release bearing area. So I pulled the transmission to find a clutch plate spring missing and a piece broken out of the plate. So I emailed Dave Crillo (DC Trucks) and he is sending me a new clutch and alignment tool. So one step back before going forward again
Follow Ups: