Posted by Vaughn on Wednesday, October 03, 2001 at 11:27PM :
In Reply to: Axles posted by Joey on Wednesday, October 03, 2001 at 8:09PM :
I'm not familiar work your truck's front axles, I'll assume they are the closed split knuckle flange type. Not sure if the knuckle flange you have will accept the knuckle and brake plate from a 3/4 ton, your going to have to take it apart and see. If it does accept it, then your going to have to probably use a 3/4 ton outer axle that matches the universal joint of the inner axle. What you have probably would not be long enough. The best thing to do is probably get a 3/4 ton front differential and use it.
|
This board is powered by the Mr. Fong Device from Cyberarmy.com |