Posted by Willy-N [108.162.221.26] on Thursday, February 11, 2016 at 23:33:56 :
In Reply to: Push in bezel, push the short pin out. posted by Chris Case [173.245.48.107] on Thursday, February 11, 2016 at 15:33:06 :
I ended up not keeping the templates! Wish I had them today as I had to make them again for the sides and of course used 2 sections of material to make the one for the side and ruined it. There pretty easy to make with 4 ft wide material. Lay your metal front trim on the headliner and cut it the same. You have to roll it as you mark it out to make the cut with. You can also use the trim for the bottom shape of the sides and take some time and cut some cardboard for the rest of it.