Posted by Willy-N [108.162.216.23] on Sunday, January 31, 2016 at 19:17:52 :
Here is where it goes on the bed. I still need to weld the plates on the ends. Under the bed side on the outside edge there will be a 6"x6"x3/8" plate bolted under the bed next to the hoist. The other end will have a 2 1/2"x6"x3/8" strap steel bolted into the frame. These will be welded to the ends of the gusset. When this is bolted in I made it to go up against the corner of the place the sheets are bolted together also. This will stop movement both ways on the tailgate end of the bed.
Follow Ups: