Posted by clueless [108.162.236.211] on Wednesday, January 27, 2016 at 12:06:11 :
In Reply to: Re: Bill I Got the Power Steering Unit Today! posted by Willy-N [108.162.216.23] on Wednesday, January 27, 2016 at 01:46:17 :
the prob is the m37 set up sits outside the frame as the stock m37 sbox and shaft also sits outside the frame cuz the m37 cab is wider and it uses 2 draglinks an idler arm and idler arm bracket to get to the steering arm
you will have to do the same but at an angle from the wheel and shaft to the ps box
i was looking at mine and maybe you could cut the stock shaft way up closer to the wheel and run the steering shaft and couplers at an angle from there to the box but then the pitman shaft is a lot further out from the frame--it may work at that angle or maybe you could use the m37 pitman arm(but it is much shorter than the pw) with the lower m37 drag link
Follow Ups: