Posted by Willy-N [108.162.216.23] on Friday, January 22, 2016 at 21:37:56 :
In Reply to: Re: Gusset Location to Frame Rails Pic. posted by Willy-N [108.162.216.23] on Friday, January 22, 2016 at 20:41:35 :
This is the welded on gussets for the hoist under the flat section it bolts to. The gussets slip over the 2 sections of plate on the bottom and bolt thru them into the piece that is the bottom and squeeze them together. If I feel it is needed I can tie these into the frame but it needs to be done with bolts so all this can come back off later. The way the sides are put together and welded up it has to bend the whole works to come down or up and that is a lot of steel!
Follow Ups: