Posted by mannyc [108.162.219.190] on Tuesday, January 19, 2016 at 20:50:31 :
In Reply to: Finally going to rebuild the T-118 motor posted by Dozerman51 [162.158.255.60] on Tuesday, January 19, 2016 at 19:23:03 :
balance the rotating assembly, rebuild distributor properly with new bushings, do a 2bbl carb on a stock iron intake manifold and do a split stock manifold that maintains the heat riser function. shave the stock cast iron head. cam is kagei's department. do a cam, with new springs, etc. chevy valves help breathing? yes, then use them...
Follow Ups: