Posted by Willy-N [108.162.216.23] on Tuesday, January 12, 2016 at 20:27:44 :
In Reply to: Re: Stopped at the Local Machine Shop today posted by dave horvath [173.245.54.28] on Tuesday, January 12, 2016 at 20:15:06 :
Another 345 lbs for the sides 345 lbs for the bottom and probley another 150-200 lbs for the end and tail gate. The whole set up is just about 1,000 lbs with the frame and should give me great traction empty which it will be most of the time. It will be pretty much bullet proof for dents throwing stuff in the back compared to the paper thin newer truck beds! I measured the bed with the sides it will be 79 1/2" wide which will give me a nice sized bed level with the line on the cab below the window and flush with the sides of the tool boxes.
Follow Ups: