Posted by Greg Coffin [162.158.255.13] on Saturday, January 02, 2016 at 15:32:08 :
In Reply to: Are shear pins tapered? Remove one way? posted by Chris Case [108.162.215.90] on Saturday, January 02, 2016 at 14:09:19 :
Shear pins are not tapered. It should have a 5/16" pin for an MU-2 rated at 10,000lbs, and a 1/4" pin for 8,000lbs. An ungraded steel bolt is about the right hardness.
Follow Ups: