Posted by Willy-N [108.162.216.23] on Saturday, January 02, 2016 at 13:13:03 :
In Reply to: Winch yoke posted by scott 56 [162.158.255.5] on Saturday, January 02, 2016 at 12:34:10 :
Turn the yoke till you can get the proper size drill bit inside the shaft and drill out the hole. Sounds like the shear pin hole is now off center and messed up the hole and hanging up a little. You can drive another bolt thru and knock out any pieces of steel in the way to make sure it is open.
Follow Ups: