Posted by John Eickhof [108.162.244.85] on Wednesday, December 30, 2015 at 23:27:48 :
In Reply to: Re: Looking for input on front axle rebuild posted by John Eickhof [108.162.244.85] on Wednesday, December 30, 2015 at 23:17:11 :
When dis-assembling the axle joints, be sure to keep them as a set and mark them with a punch or indelible pen as they come out assembled, then re-assemble exactly the same. If you mix them up or reverse the fits (180 degrees out) they can bind up, rattle or cause vibration. If you replace one joint piece, you must replace both pieces!