Posted by Willy-N [72.168.160.5] on Tuesday, December 22, 2015 at 20:19:43 :
Almost finished except for the Solenoid Bank of 4 Air Switches to mount on the right and hook to that 1/4" tube. The other tube is off the bottom of the regulator for the Solenoid Bank. The compressor feed goes into the fitting next to the main air gauge. There is a breaker switch to shut it off for any reason and the 40 amp relay is hooked to the pressure switch 90 psi on and 120psi off. It also has a place to hook in my air hose for the air operate Jack and tire filling hose. This will mount on the inside of the tool box next to the compressor.
Follow Ups: