Posted by Willy-N [72.168.160.211] on Monday, December 07, 2015 at 21:05:28 :
In Reply to: Re:Pivot point on frame posted by Willy-N [72.168.160.211] on Monday, December 07, 2015 at 20:58:35 :
I have not tighten the bars together on the bushings yet they have to come back off. Now you can see how the linkage works as a unit to push with. Having 2 levers allows me to use the original brake pedal rod push. Using the pivot I can match up the distance and have the same pushing power on the pedal. It is almost done now except pulling pout the old system and making up the rod. Them I can pull the old brake lines off the red 10 lb residual check valves and go up to the new master cylinder and bleed the system..
Follow Ups: