Posted by chris irick [73.178.110.5] on Tuesday, November 17, 2015 at 20:48:52 :
In Reply to: Could it be... posted by Bob in N. GA [207.155.98.77] on Tuesday, November 17, 2015 at 18:27:58 :
Replace all lines with stainless, re-sleeve master and wheel cylinders with stainless. Keep DOT #3, never have a problem again. Been there, done that, it works. Cost is about 4-500.00 when all is said and done, but you will always stop, worry free.
Follow Ups: