Posted by Willy-N [72.171.192.62] on Monday, November 09, 2015 at 11:54:41 :
In Reply to: I need a Oil Filter Gasket Number? posted by Willy-N [72.171.192.117] on Sunday, November 08, 2015 at 20:23:50 :
I have one off a original T137 engine. It measures out this way. ID is 4" the gasket appears to be 4 1/2" OD and it total length of 7 inches top of wall not the lid and the strait part is 5 1/2" long with a bell shaped bottom. Uses a T-Handle and a small gasket under the handle. I think I will pull the one I have on the engine and use this one for it. It had a bag filter inside it before. The T-Handle has a hollow shaft threaded with a hole drilled thru it to let the oil out at the top of the housing and a drain plug at the bottom with another one for the oil line. Oil lines are both 3/8" fine threads. Is this a original oil filter housing it came off one from a 1951 PW. The one now used came on the Plymouth 1948 230 engine. Is there a number for this filter that uses the sock instead of a can type?
Follow Ups: