Posted by Willy-N [72.171.192.121] on Friday, October 23, 2015 at 23:29:11 :
In Reply to: Re: Ha Ha Ha and changing polarity posted by Glen of Idaho [70.41.244.80] on Friday, October 23, 2015 at 23:12:28 :
Seems to be I used a lot of clamps while welding and angle sitting on top to make sure they were the same height at the corners. I have had stuff move before welding it! The ends are welded to the 2x4 box steel. Tacked it all on first then welded it on. The bed bottom will over hang the edge of the angle iron by 4 inches on each side. After I get back from town tomorrow I will detail it and put my welder back in the shop. Don't want it rained on or look to good to others eyes!