Posted by Willy-N [72.171.192.119] on Sunday, October 18, 2015 at 12:10:49 :
In Reply to: Re: Tail Lights On Picture posted by Milo in Pa [71.116.16.179] on Sunday, October 18, 2015 at 10:11:24 :
One did not quite cut it and I had to space them out a little using 3/8" ID pipe to clear the bolts on the frame and keep them even. Need to add a 45 deg brace on the back to the frame to really make them strong. I will pick up some KO Seals to seal off the side next to the frame and use a insulated water tight connector for the cable feeding them. There is a hole between them for the wires.