Posted by Willy-N [72.171.192.118] on Sunday, October 11, 2015 at 18:46:47 :
Tested it for the first time using jumper cables to the power leads. By/passed the safety and ran it up since I have not got my switch yet. After raising and lowering it to get the air out of the cylinders it worked great. You do need a good charged battery and mine is old and weak. It still did the job OK. One thing I did notice is when you pump it down it holds the frame tight and not sure it would lift up even with out the air locks not holding it down. The safety circuit worked when I opened the connection at the end of the small cable. Wish my side tool box would get here so I could mount it and finish a bunch of stuff waiting to go in it to complete the job.
Follow Ups: