Re: /6 heat riser

Posted by Sherman in Idaho [72.47.153.163] on Tuesday, September 15, 2015 at 21:00:29 :

In Reply to: Re: /6 heat riser posted by Kaegi [76.22.23.236] on Tuesday, September 15, 2015 at 20:31:55 :

There is no weight, just a stamped steel piece. Maybe there's supposed to be a weight and it's missing? As it is now, when it's hot it's all the way counterclockwise, with considerable spring pressure holding it there. I will have to see how it is when it's cold, but I'm pretty sure it's in the same position, and I have to use the wire to pull it up. But what I'm really asking is whether "clockwise" or "counterclockwise" is the "carb heat position". Terms like "open" are ambiguous to me, because that could mean the exhaust path is open, bypassing the carb heat chamber, or it could mean the valve directing heat into the carb base is open, for max heating. So, which direction, CW or CCW, heats the carb?

Follow Ups:

• Re: /6 heat riser - Kaegi 01:05:19 09/16/2015
  • Thanks. - Sherman in Idaho 03:31:12 09/16/2015
    • Re: Thanks. - Kaegi 11:53:29 09/16/2015
      • Ah, now we're getting somewhere. - Sherman in Idaho 16:18:14 09/16/2015
        • Re: Ah, now we're getting somewhere. - Brent 21:59:48 09/16/2015
        • Re: Ah, now we're getting somewhere. - Kaegi 20:29:35 09/16/2015
• Re: /6 heat riser - Brent 23:00:29 09/15/2015
  • Re: /6 heat riser - Brent 23:09:37 09/15/2015
    • Re: /6 heat riser - Sherman in Idaho 03:06:13 09/16/2015
      • Re: /6 heat riser - Brent 15:30:22 09/16/2015

Post a Followup