Posted by Willy-N [72.171.192.117] on Thursday, August 13, 2015 at 23:09:06 :
In Reply to: Got my Hitch on with the Bearing Mount. PICT posted by Willy-N [72.171.192.117] on Thursday, August 13, 2015 at 22:58:03 :
You can see looking down the frame the rear two mounts are about a inch lower. The Bearing Blocks go next to these bolted two on each side to the bed frame. Then the 1 1/8" solid steel hinge rod goes thru all 4 Bearings and into 2-3 steel bolt on blocks to hold it to the 6X6 Frame when dumping a load. Should make a solid hinge and the bed can flex some off road away from the frame at the front on spring lock downs.