Posted by Willy-N [72.171.192.62] on Wednesday, August 05, 2015 at 22:19:42 :
In Reply to: Re: They only had 1/2" & Fits Better. posted by Daryl in Oz [58.179.206.135] on Wednesday, August 05, 2015 at 18:41:56 :
The panels fit good and will be covered by the back and head liner. With the top done it is way different inside the cab sound wise. I will use different stuff inside the doors and more fiber pad on the inside of the fire wall covered later.
I sandblasted the floor bare and cleaned off the cab insides using some sand. Then I used Phosphoric Acid on the whole cab inside and out. Cleaned it again then sprayed bed liner on anything covered and painted over that to seal it good. I will use epoxy primmer on the whole cab inside and out before any trim goes on. I would like to do as much to the cab on the rollers as I can. Easy to get in and under the dash after it is painted.
Follow Ups: