Posted by clueless [186.15.46.13] on Sunday, July 26, 2015 at 14:55:43 :
in the stock bracket in the bare chassis
i did push it in on the push rod in position in the orange beast to see if it cleared the sbox and it did but then just bolted it into the bare chassis to see what it looked like rather than fight with the push rod
don t like the fitting just pushed in like the plastic resevoirs so i clamped em
there are other options for clamping and fittings
but this was the easiest at the time to mock it up and check for fit and hose routing--i had the clamps the other way around but the threaded bolt ends were too long and hit the sbox but they can be shortened so i turned em around so i could bolt it in the bracket
now that i got it to fit i will cadillac out the details as best i
Follow Ups: