Posted by daveyKinPa [65.78.124.141] on Tuesday, July 14, 2015 at 20:34:00 :
In Reply to: Re: wood splitter posted by Jerry in Idaho [24.49.176.137] on Tuesday, July 14, 2015 at 20:25:38 :
Jerry,
I am sure if you know the input RPMs for the pump or the output speed of the gas motor the pulley sizes could be calculated to get the correct RPMs
Most of the rear PTO output RPMs were on the lower end to power the low speed farm implements.
but it could be done :-)