Posted by ed [186.15.46.13] on Sunday, July 05, 2015 at 22:37:45 :
In Reply to: yellow sea posted by ed [186.15.46.13] on Sunday, July 05, 2015 at 22:28:58 :
i was playing around with dimensions etc. on my 1050s and as far as i can tell if i wanted to run one offset and one stock the offset would have to be 4 in. to get some clearance but then i would be illegal so a plus or minus 2 in. offset on all 4 would work and i would be barely be legal but then the inner has to fit over the drum of the caliper
i have seen this before with 900 s as i bought a parts truck from an oilfield opertator that was running dual 900s and all four were offset 1.5 inches and the ear on the drum od was turned down so the inners would slide over it--i used them on my 47 wdx for couple years till it was stolen
Follow Ups: