Posted by Kevin in Ohio [192.182.188.72] on Sunday, July 05, 2015 at 18:46:34 :
In Reply to: Painless Wiring on WDX posted by Jim in Litchfield Park [24.251.253.225] on Sunday, July 05, 2015 at 18:35:56 :
It would help a lot to know what you have. Stock, Modified, motor, etc. I was modified and used a painless harness. It is pretty straightforward as the wires are all marked where they go.
In stock form they are pretty simple and you'll end up clip[ping a lot of wires off as they are unneeded. I saved a few runs for what if's. The biggest tip I can give you is make sure stuff is grounded well. If you didn't put in ground posts, you are going to be scratching off some paint to get metal to metal contact on lights and such.
Tell us what you have first.
Follow Ups: